Friday, 1 April 2016

Task 7

Potential And Limitations of Materials

Clay:

The clay model was exceptionally difficult, as the clay- while malleable- was on a 'time limit'. The clay would harden after about ten minutes of exposure to air, thus meaning that each different piece of the model would need to be created within a small time space between the creation of one and the creation of another; in essence, each piece had to be 'glued' to the main body before it hardened enough so that doing so would be otherwise impossible.

The clay is of a texture similar to rock once it becomes exposed to oxygen, smooth and easy to mould other textures into it using tools.

Metal Wire:

Metal wiring was used as a support for the clay- this was done because when clay hardens it becomes denser and heavier, thus weighing down more on the pieces that haven't yet hardened. The wiring was used to also strengthen the pre-existing clay pieces, stopping the weight from forcing the entire thing to collapse upon itself.

Metal wiring, while flimsy, provides a solid frame to expand upon- whilst also providing an in-depth look into the 'skeleton' structure of the insect that I have created with the other materials. The wire can be strong, but depending on the type of wire, it could end up either strong or weak- for example, the silvery wire was used to tie two pieces of wire together, but if i had used it as the wire itself it would have bent in on itself because it was known to be 'soft'. Another wire is the green one; often used as the main wire that is used to create the structure of the insect- while it is strong, it isn't flexible, and therefore while not breakable easily it can't be used for more nimbler uses.


Papier Mache:

With the papier mache being completed, I had observed the texture, composition, and base, and had compared it to the other materials that were in my possession at the time. All in all, papier mache is quite impressive in terms of sturdiness and overall solidity. When papier mache is being added to the base of the object you are making- in this case it was cardboard- the glue that is part of the mache hardens, and the paper that is the papier solidifies beneath it, causing it to dry and become hard. 

Monday, 29 February 2016

Task 5/6

The end Product: This is the end product of my wireframe insect; which has been strengthened to be able to stand on its own without any outside help. The wires of the insect are strong, green wires, along with the soft silver wires acting as joints for the wires to keep them together without being snapped when it was moved slightly.


Task 4




With the creation of my insect/drawing of a 'mini beast' I glued it to a backdrop which was then painted two different colours- in this case it was a watered-down blue and a gold colour- and applied it to the backdrop. Once done the insect was clued to the paper, with colours added afterwards.

The colours for the main body remained strictly as oil pastels, while water colouring and smatterings of oil pastel was used for the wings. The face of the insect was simply filled in with gold and watercolour pencils.

Friday, 13 November 2015

Task 2- Mini Beasts- Drawings

This shows the beginning of my insect creation; this was a drawing that many others had to do by copying, to the best of our abilities, a picture of an insect. Originally we had to do about three, but I only got the chance to do two.

This is the second insect image that I started drawing, but as we had to move on I couldn't finish it- I prefer to do quality over quantity, but both works weren't my best in any sense.

 This image is the attempt to mix he two previous images above with the wings of a butterfly- with one of the many issues I had with this being the choosing of the colours that were to be used, as well as getting the correct proportions.

This image is a mix of the image below this one, as well as a picture of a caterpillar. This image would have been the final image, but eventually became the basis for the real final image.
This shows an odd creature I copied, where I then decided that the body is going to be used for the final image, while the head of the creature would be replaced with the head of the bee that is drawn to the side (top right of the image).

Task 3- Mini Beasts- Images